Hi,
I am looking to 'chain' few NeoPixel Jewel - 7 x 5050 RGB LED and while I looked on the following image:
https://cdn-shop.adafruit.com/970x728/2226-04.jpg I see that there are two ground holes,
but in the following image I see you used only one "hole" for soldering the ground wire https://cdn-learn.adafruit.com/assets/a ... 1444245144
Therefore, do I need to solder the ground line into one “hole” like you do with the 5V or in using the two "holes?
Thanks
How to solder solder few NeoPixel Jewel - 7 x 5050 RGB LED
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- elyraz
- Posts: 4
- Joined: Sun Oct 11, 2020 3:33 am
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: How to solder solder few NeoPixel Jewel - 7 x 5050 RGB L
Both ground holes are connected together on the board. So it doesn't matter if you use just one or both. Whatever is more convenient for you.
Please be positive and constructive with your questions and comments.