So I just ordered a couple of these 10 packs and the breakout boards. Is there a video showing how to solder the led onto the board and what pinouts are what, like what wires to connect to power.
thanks
Steve
SMT 5050 Cool White 10 packs
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88037
- Joined: Sat Feb 07, 2009 10:11 am
Re: SMT 5050 Cool White 10 packs
the pinouts of the devices are shown in the Technical Details part of the product description: https://www.adafruit.com/product/682
For manual soldering of surface mount components, see this guide: https://learn.adafruit.com/adafruit-gui ... face-mount
For general information on how to work with LEDs and details such as how to calculate the value of your current limiting resistors, see: https://learn.adafruit.com/all-about-leds
For manual soldering of surface mount components, see this guide: https://learn.adafruit.com/adafruit-gui ... face-mount
For general information on how to work with LEDs and details such as how to calculate the value of your current limiting resistors, see: https://learn.adafruit.com/all-about-leds
Please be positive and constructive with your questions and comments.