Adafruit 16-Channel 12-bit PWM/Servo Shield Configuration?

This is a special forum devoted to educators using Adafruit and Arduino products for teaching.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
kloud
 
Posts: 2
Joined: Thu Oct 06, 2016 9:59 am

Adafruit 16-Channel 12-bit PWM/Servo Shield Configuration?

Post by kloud »

Before I buy this I need to know if I have to solder the servo pins, power pins, etc.. or does it come already assembled?
https://www.adafruit.com/product/1411

Also what library do I download to have it work on the arudino?
Please forgive me if these questions have been ask before.

User avatar
adafruit_support_bill
 
Posts: 88097
Joined: Sat Feb 07, 2009 10:11 am

Re: Adafruit 16-Channel 12-bit PWM/Servo Shield Configuratio

Post by adafruit_support_bill »

You will need to solder the Arduino headers, the Servo headers and the external power terminal.

Links to the library and other resources can be found in the "Downloads" section of the guide: https://learn.adafruit.com/adafruit-16- ... -and-links

User avatar
kloud
 
Posts: 2
Joined: Thu Oct 06, 2016 9:59 am

Re: Adafruit 16-Channel 12-bit PWM/Servo Shield Configuratio

Post by kloud »

Is there anyway I can buy this chip already assembled?

User avatar
adafruit_support_bill
 
Posts: 88097
Joined: Sat Feb 07, 2009 10:11 am

Re: Adafruit 16-Channel 12-bit PWM/Servo Shield Configuratio

Post by adafruit_support_bill »

We are not set up to do pre-assembled kits. You might want to check at a local hacker-space to see if someone would be willing to help you assemble it.

Locked
Please be positive and constructive with your questions and comments.

Return to “For Educators”