0

Error in text in diagram of 0.96 in 128*64 OLED display SSD1
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Error in text in diagram of 0.96 in 128*64 OLED display SSD1

by aclassifier on Sun Mar 07, 2021 2:09 pm

In [1] I think there is an error:

  • SJ2 reads "Close SJ2 for I2C" which is ok.
  • SJ1 redas "Open for I2C" which is.. wrong?

..since it says "For I2C Close SJ1/2" on the silk print.

It also says on the chip in the diagram "Connect for I2C" between D1 and D2 which makes sense to me.

[1] https://cdn-learn.adafruit.com/assets/assets/000/093/884/original/adafruit_products_0-96in_OLED_sch.png?1596746114

aclassifier
 
Posts: 18
Joined: Sun Jun 21, 2015 2:03 am

Please be positive and constructive with your questions and comments.