On the Proto Plate for Beagle Bone Black product page (https://www.adafruit.com/products/702) it lists the standoffs that come with the kit as '4 x 4 3/8" nylon standoffs' but in reality the standoffs are 3/16" long (not 3/8" long). Due to the thickness of the BeagleBone's PCB and the acrylic plate, 1/2" long screws are the correct length for 3/16" standoffs, so everything that comes in the kit works together, it's just the website listing which is incorrect.
I couldn't figure out from the Adafruit website's contact page how to send an error about a listing, possibly this is simply due to me not yet having my coffee, so I'm sorry if this is the wrong place to report such an issue.
Thanks!
Proto Plate for Beagle Bone Black - incorrect standoff lengt
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- bradfa
- Posts: 1
- Joined: Wed Nov 30, 2016 9:17 am
- drewfustini
- Posts: 944
- Joined: Sat Dec 26, 2015 1:19 pm
Re: Proto Plate for Beagle Bone Black - incorrect standoff l
Thanks, I've sent this to the support team.
Please be positive and constructive with your questions and comments.