Adafruit Industries, Essential service and business: NYC – Executive Order 202.6 - Read more. Accepting essential orders - here's how.
0

3.2" tft ili9341 base with beaglebone
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

3.2" tft ili9341 base with beaglebone

by Arminhmt on Wed Jun 22, 2016 3:01 am

hi
i want to know that does this driver "Adafruit_Python_ILI9341" which used to drive adafruit ili9341 2.8" can support 3.2" to be connected to beaglebone too or not?!
i couldn't find 2.8" LCD with this driver in my country!!!

my LCD INFO:

Manufacturer Rising Sun Eastern
Product Series Model ER-TFT032
IC or compatible IC ILI9341
Connection FPC single panel
Resolution 240x320 dot matrix
Screen Size 3.2 "
Interface 80808-bit parallel 8080 16 parallel, three-wire serial interface SPI, 4-wire serial interface SPI

Arminhmt
 
Posts: 3
Joined: Wed Jun 22, 2016 1:21 am

Re: 3.2" tft ili9341 base with beaglebone

by drewfustini on Wed Jun 22, 2016 4:09 pm

Please see the wiring diagram on User-space SPI TFT Python Library - ILI9341.

This is specific wiring for the Adafruit LCD breakout board, so you'll need to translate the connects to the appropriate pins on your display.

This is the GitHub Repo for the library:
Adafruit_Python_ILI9341

drewfustini
 
Posts: 920
Joined: Sat Dec 26, 2015 1:19 pm

Re: 3.2" tft ili9341 base with beaglebone

by Arminhmt on Sat Jun 25, 2016 1:15 am

drewfustini wrote:Please see the wiring diagram on User-space SPI TFT Python Library - ILI9341.

This is specific wiring for the Adafruit LCD breakout board, so you'll need to translate the connects to the appropriate pins on your display.

This is the GitHub Repo for the library:
Adafruit_Python_ILI9341



hi drewfustin.

actually i know that i must change the wiring according my lcd pin out!
but Im not sure about the python driver that can support this size of lcd or not!?
i just asked here to get know that any body have tested this python code with 3.2" and get the appropriate view of it or not and how can i change the driver code to get worked with this size of lcd!?
im not native English so sorry about my bad english and im newbie with python and BBB!
thanks for your answer.

Arminhmt
 
Posts: 3
Joined: Wed Jun 22, 2016 1:21 am

Please be positive and constructive with your questions and comments.