Adafruit 16-Channel PWM / Servo HAT Soldiering Concern

Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Locked
User avatar
Pjknopf
 
Posts: 3
Joined: Thu May 31, 2018 11:31 am

Adafruit 16-Channel PWM / Servo HAT Soldiering Concern

Post by Pjknopf »

I would like to make use of the 5 x 10 lead grid (the leads under the row of GND lead connections) on the right side of the Adafruit 16-Channel PWM Hat. Are the leads (I think that is what they are called) connected to any components of the board electronically or just there without function? Thank you for the support!
Top
User avatar
adafruit_support_bill
 
Posts: 88136
Joined: Sat Feb 07, 2009 10:11 am

Re: Adafruit 16-Channel PWM / Servo HAT Soldiering Concern

Post by adafruit_support_bill »

The holes in the prototyping grid are not connected to anything else on the board. You can use them for your own custom circuitry.
Top
Locked
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

Return to “Adafruit Raspberry Pi® accessories”