Due to high demand expect some shipping delays at this time, orders may not ship for 1-2 business days.
0

PI Eye partial eye on HDMI
Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Please be positive and constructive with your questions and comments.

PI Eye partial eye on HDMI

by nl28382 on Wed Oct 20, 2021 6:01 pm

I just installed the Pi eye software o a Pi3B with an Adafruit 5" HDMI display. However, only 2/3rd of the eye is visible (the eye is not centered).

config.txt is set to group = 2 mode=87, cvt = 800 480 60 6 0 0 0 .

Any suggestions to center the eye image?
Attachments
IMG_4050[1].JPG
Photo of display attached
IMG_4050[1].JPG (274.4 KiB) Viewed 60 times

nl28382
 
Posts: 34
Joined: Wed Jan 11, 2017 10:13 am

Re: PI Eye partial eye on HDMI

by nl28382 on Thu Oct 21, 2021 9:06 am

Found the issue.

There was a second section of HDMI config at the bottom of the config.txt file that re-set the HDMI resolution to 640 by 480 under "NOOBS Auto=Generate Setting". I commented this out and now get a centered eye.

nl28382
 
Posts: 34
Joined: Wed Jan 11, 2017 10:13 am

Please be positive and constructive with your questions and comments.