Pomeronic HyperPixel - 4.0" Hi-Res Display for Raspberry Pi
Moderators: adafruit_support_bill, adafruit
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
- Knautica
- Posts: 22
- Joined: Mon May 16, 2022 5:50 pm
Pomeronic HyperPixel - 4.0" Hi-Res Display for Raspberry Pi
I can not get this display to work on a pi 3 pi 4 or pi 400. what is the way to make this happen? I followed the steps on get hub and on Pimoroni. what am I missing.
- dastels
- Posts: 15608
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Pomeronic HyperPixel - 4.0" Hi-Res Display for Raspberry
I found that it took quite a bit of googling and finicky, low-level configuration work to get it working how I wanted it to. It will work very nicely once all that is done.
I assume you've worked through https://learn.pimoroni.com/article/gett ... perpixel-4 since you mentioned the Pimoroni instructions.
For the 400, how are you connecting it?
Dave
I assume you've worked through https://learn.pimoroni.com/article/gett ... perpixel-4 since you mentioned the Pimoroni instructions.
For the 400, how are you connecting it?
Dave
- Knautica
- Posts: 22
- Joined: Mon May 16, 2022 5:50 pm
Re: Pomeronic HyperPixel - 4.0" Hi-Res Display for Raspberry
to a cyberdeck and just a pi 3 and 4 no results on either
- dastels
- Posts: 15608
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Pomeronic HyperPixel - 4.0" Hi-Res Display for Raspberry
You will need to make adjustments to the JST port5s on the CyberDeck for use with the HyperPixel 4.0. See https://learn.adafruit.com/cyberdeck-bo ... -3104511-6.
Is anything else connected to the Pi 3 & 4?
Dave
Is anything else connected to the Pi 3 & 4?
Dave
- Knautica
- Posts: 22
- Joined: Mon May 16, 2022 5:50 pm
Re: Pomeronic HyperPixel - 4.0" Hi-Res Display for Raspberry
no no thing connected to the 32 or 4!
- dastels
- Posts: 15608
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Pomeronic HyperPixel - 4.0" Hi-Res Display for Raspberry
As I recall the Pimoroni instructions got it up and running. It took me longer as I needed it to be a landscape console display, not a GUI.
Dave
Dave
- Knautica
- Posts: 22
- Joined: Mon May 16, 2022 5:50 pm
Re: Pomeronic HyperPixel - 4.0" Hi-Res Display for Raspberry
I spent the last four hours on the site that makes the display on a ras 3 and nothing! I’m so pissed
- dastels
- Posts: 15608
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Pomeronic HyperPixel - 4.0" Hi-Res Display for Raspberry
Yeah, it took me a few days. It's very fiddly work. Keep at it!
Dave
Dave
- Knautica
- Posts: 22
- Joined: Mon May 16, 2022 5:50 pm
Re: Pomeronic HyperPixel - 4.0" Hi-Res Display for Raspberry
Total junk nothing worked for these.
Adafruit 2.23" Monochrome OLED Bonnet for Raspberry Pi PID: 4567 $22.50 1 $22.50
Pimoroni HyperPixel - 4.0" Hi-Res Display for Raspberry Pi - Non-Touch
Adafruit 2.23" Monochrome OLED Bonnet for Raspberry Pi PID: 4567 $22.50 1 $22.50
Pimoroni HyperPixel - 4.0" Hi-Res Display for Raspberry Pi - Non-Touch
- adafruit_support_carter
- Posts: 29056
- Joined: Tue Nov 29, 2016 2:45 pm
Re: Pomeronic HyperPixel - 4.0" Hi-Res Display for Raspberry
Those are two different products. Setup for the OLED Bonnet is very different than the setup for the Pimoroni HyperPixel.
We can help troubleshoot the OLED, but best to focus on one thing at a time.
Is there a specific step in Pimoroni's setup instructions for the HyperPixel that did not work as shown?
https://learn.pimoroni.com/article/gett ... perpixel-4
We can help troubleshoot the OLED, but best to focus on one thing at a time.
Is there a specific step in Pimoroni's setup instructions for the HyperPixel that did not work as shown?
https://learn.pimoroni.com/article/gett ... perpixel-4
- Knautica
- Posts: 22
- Joined: Mon May 16, 2022 5:50 pm
Re: Pomeronic HyperPixel - 4.0" Hi-Res Display for Raspberry
I got the hyper pixel to work on the pi 4 and 400. Will work on the opex later
- Knautica
- Posts: 22
- Joined: Mon May 16, 2022 5:50 pm
- Knautica
- Posts: 22
- Joined: Mon May 16, 2022 5:50 pm
Re: Pomeronic HyperPixel - 4.0" Hi-Res Display for Raspberry
This hyper pixel 4 worked once until rebooted now it does nothing on pi 400 pi 4 or pi 3!! Totally disappointed with this product and support.
- adafruit_support_carter
- Posts: 29056
- Joined: Tue Nov 29, 2016 2:45 pm
Re: Pomeronic HyperPixel - 4.0" Hi-Res Display for Raspberry
The only that happened between working and not working was a reboot?
If you start over and follow Pimoroni's guide:
https://learn.pimoroni.com/article/gett ... perpixel-4
you can not recreate your previous success?
If you start over and follow Pimoroni's guide:
https://learn.pimoroni.com/article/gett ... perpixel-4
you can not recreate your previous success?
- Knautica
- Posts: 22
- Joined: Mon May 16, 2022 5:50 pm
Re: Pomeronic HyperPixel - 4.0" Hi-Res Display for Raspberry
I have followed every guy there is out there they are replacing my display because they say it’s bad also
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/