0

PN532 and NTAG203
Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Please be positive and constructive with your questions and comments.

PN532 and NTAG203

by paintlax on Sat May 01, 2021 7:49 pm

I was curious what the read distance of the NTAG203 is with the PN532. I wanted to place the tag on the inside of a glass bottle at the bottom and read it from underneath with the PN532. Will this be too far?

Edit: I am referencing PRODUCT ID: 2800

paintlax
 
Posts: 19
Joined: Sat May 03, 2014 11:00 pm

Re: PN532 and NTAG203

by mikeysklar on Mon May 03, 2021 4:25 pm

You are trying to read the tag through 1/4" or less of glass? That seems reasonable. The datasheet states this tag can work 4" away (100mm).

mikeysklar
 
Posts: 4634
Joined: Mon Aug 01, 2016 8:10 pm

Please be positive and constructive with your questions and comments.