0

Adafruit CSI or DSI Cable Extender Thingy Hole offsets
Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Please be positive and constructive with your questions and comments.

Adafruit CSI or DSI Cable Extender Thingy Hole offsets

by DLWood1001 on Sat May 08, 2021 7:56 am

Hey, could I get the dimension schematics for the hole offsets on the Adafruit CSI or DSI Cable Extender Thingy. I want to 3d print a case for for the adaptor board and my calipers are not accurate enough on these tiny holes.

DLWood1001
 
Posts: 1
Joined: Sat May 08, 2021 7:52 am

Re: Adafruit CSI or DSI Cable Extender Thingy Hole offsets

by mikeysklar on Sun May 09, 2021 7:37 pm

The Eagle schematic and board files for the CSI / DSI camera extender are here:

https://github.com/adafruit/Adafruit-CS ... spberry-Pi

There is also an enclosure designed outside of Adafruit on thingiverse.

https://www.thingiverse.com/thing:3057038

mikeysklar
 
Posts: 4513
Joined: Mon Aug 01, 2016 8:10 pm

Please be positive and constructive with your questions and comments.