I am working on a project where I am bringing an FTDI board, UART over usb, I2C over USB, and RS232 serial over usb. I do not have enough ports on my RPi for all of the devices that I am using. When testing multiple USB and powered USB hubs on the market, I am unable to get the data to flow to my RPi. I am looking at using the Zero4U - 4-Port USB Hub without Pogo Pins - v1.3 https://www.adafruit.com/product/4115#technical-details, but wanted to see if the community had ideas on how to resolve my issue or if this issue may be resolved with this device.
Thanks!
Zero4U - 4-Port USB Hub, does this support UART, I2C, and RS
Moderators: adafruit_support_bill, adafruit
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
- sterzy
- Posts: 8
- Joined: Thu Jun 17, 2021 1:42 pm
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/