2.13" Monochrome E-Ink Bonnet Faded
Moderators: adafruit_support_bill, adafruit
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
- csotzing
- Posts: 14
- Joined: Fri May 07, 2021 10:56 pm
2.13" Monochrome E-Ink Bonnet Faded
I've built a temperature & humidity monitor out of a Pi Zero and a 2.13" Monochrome E-Ink Bonnet. After a few months of running 24/7 the display is not nearly as "dark" as it was; that is, the blacks are faded considerably. The application refreshes the screen every 5 minutes so I'm definitely not *over-refreshing. Can the contrast be configured or is this bonnet just wearing out?
- Attachments
-
- DSC_0223.JPG (398.61 KiB) Viewed 349 times
- Franklin97355
- Posts: 23902
- Joined: Mon Apr 21, 2008 2:33 pm
Re: 2.13" Monochrome E-Ink Bonnet Faded
Do you see any "ghost image"?
- csotzing
- Posts: 14
- Joined: Fri May 07, 2021 10:56 pm
Re: 2.13" Monochrome E-Ink Bonnet Faded
Do you mean when the display inverts when it refreshes? In that case yes and actually having just watched the refresh a few times the black in the inverted image is *way darker, probably as dark as it ever was. It goes faded gray immediately after the refresh.
- adafruit2
- Posts: 22111
- Joined: Fri Mar 11, 2005 7:36 pm
Re: 2.13" Monochrome E-Ink Bonnet Faded
yeah it could be wearing out, how many refreshes have you done (total count?) - we can ask if theres a refresh limit from the manufacturer
- csotzing
- Posts: 14
- Joined: Fri May 07, 2021 10:56 pm
Re: 2.13" Monochrome E-Ink Bonnet Faded
The display updates every 5 minutes and runs 24h. So for the time I've had it (plus the development cycles) I guess it's around 20,000 refreshes?
- adafruit2
- Posts: 22111
- Joined: Fri Mar 11, 2005 7:36 pm
Re: 2.13" Monochrome E-Ink Bonnet Faded
yah that sounds... high. eink displays like these are designed for store labels, updating once a day
it could be that there's a max number of refreshes before it dims - oled's are the same!
we'll ask
it could be that there's a max number of refreshes before it dims - oled's are the same!
we'll ask
- csotzing
- Posts: 14
- Joined: Fri May 07, 2021 10:56 pm
Re: 2.13" Monochrome E-Ink Bonnet Faded
Thanks, I'd be interested to know if there a max number of refreshes. FWIW the example code includes a weather application which surely wouldn't be super useful if it only updated once a day!
Are there other display bonnets for a Pi Zero that include a Qwiic/STEMMA QT connector that you could recommend for a (somewhat) frequent refresh?
Are there other display bonnets for a Pi Zero that include a Qwiic/STEMMA QT connector that you could recommend for a (somewhat) frequent refresh?
- adafruit2
- Posts: 22111
- Joined: Fri Mar 11, 2005 7:36 pm
Re: 2.13" Monochrome E-Ink Bonnet Faded
once a day weather is pretty useful! the magtag does that and we have it on our fridge :)
https://learn.adafruit.com/magtag-weather
https://learn.adafruit.com/magtag-weather
- csotzing
- Posts: 14
- Joined: Fri May 07, 2021 10:56 pm
Re: 2.13" Monochrome E-Ink Bonnet Faded
Any update on max refreshes? Perhaps there is a way to adjust the contrast as the board ages? Thanks for your help.
- adafruit2
- Posts: 22111
- Joined: Fri Mar 11, 2005 7:36 pm
Re: 2.13" Monochrome E-Ink Bonnet Faded
hiya they replied asking if the display was exposed to sunlight?
- csotzing
- Posts: 14
- Joined: Fri May 07, 2021 10:56 pm
Re: 2.13" Monochrome E-Ink Bonnet Faded
The device is mounted to a wall that never gets direct sunlight. It's actually quite dark in that room.
The fact that at refresh the fully blacked out screen is very dark is still odd to me. The bonnet is still capable of that kind of contrast so perhaps the fade is a configuration issue?
The fact that at refresh the fully blacked out screen is very dark is still odd to me. The bonnet is still capable of that kind of contrast so perhaps the fade is a configuration issue?
- adafruit2
- Posts: 22111
- Joined: Fri Mar 11, 2005 7:36 pm
Re: 2.13" Monochrome E-Ink Bonnet Faded
what if you display all black
- csotzing
- Posts: 14
- Joined: Fri May 07, 2021 10:56 pm
Re: 2.13" Monochrome E-Ink Bonnet Faded
Wow I'm actually kind of surprised the result of that test. Drawing a black rectangle that fills the screen *is the correct contrast, very black. But when I go back to my text display it fades out as it was previously. I'm not setting anything except the fill (no contrast, etc.). And to reiterate the text printed in really crisp black letters originally and no code has changed since I wrote it a few months ago.
Exampe code excerpt for text:
Example code for the box:
Thanks for all the help, much appreicated.
Exampe code excerpt for text:
Code: Select all
# Draw the humidity text
draw.text(
(x_offset, (calib_display_height/4)-(humidity_text_height/2)+y_offset),
self._humidity_text,
font=self.large_font,
fill=BLACK,
)
Code: Select all
#black box
shape = [(0,0), (calib_display_width, calib_display_height)]
draw.rectangle(shape, fill=BLACK)
- adafruit2
- Posts: 22111
- Joined: Fri Mar 11, 2005 7:36 pm
Re: 2.13" Monochrome E-Ink Bonnet Faded
could be you wore out the ink in those spots, could try flashing the whole thing black or white often to help reset it. we dont have any lower level insight - its just speculation
- csotzing
- Posts: 14
- Joined: Fri May 07, 2021 10:56 pm
Re: 2.13" Monochrome E-Ink Bonnet Faded
I set the screen to all black and had it reset every 5 minutes for 24 hours. The black full screen was fully black (no fading). I then reverted it to the temp/humidity display and the text is faded again.
This tells me that it's not the pixels that are worn out because they displayed correctly as part of a fully blacked out screen.
Any word from the manufacturer?
This tells me that it's not the pixels that are worn out because they displayed correctly as part of a fully blacked out screen.
Any word from the manufacturer?
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/