12 analog inputs for RPI

Moderators: adafruit_support_bill, adafruit

Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Locked
User avatar
nchaumont
 
Posts: 2
Joined: Mon Jan 03, 2022 4:45 pm

12 analog inputs for RPI

Post by nchaumont »

Hello Adafruit community!

I have a small quadruped robot with 12 servos with feedback (https://www.adafruit.com/product/1449). I use a 16 channel PWM controller hat to activate them (https://www.adafruit.com/product/1411). Is there a way to read the 12 inputs using the same raspberry pi? What would be the best option given that all the circuitry has to be embedded on the robot?
Thank you in advance!

Best,
Nic

User avatar
adafruit_support_bill
 
Posts: 88093
Joined: Sat Feb 07, 2009 10:11 am

Re: 12 analog inputs for RPI

Post by adafruit_support_bill »

You could use a couple of MCP3008s: https://learn.adafruit.com/raspberry-pi ... rs/mcp3008

User avatar
nchaumont
 
Posts: 2
Joined: Mon Jan 03, 2022 4:45 pm

Re: 12 analog inputs for RPI

Post by nchaumont »

Thank you! Will check into it.

Nic

Locked
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/

Return to “Adafruit Raspberry Pi® accessories”