PN532 NFC/RFID controller breakout board (v1.6) compatible w
Moderators: adafruit_support_bill, adafruit
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
- Davidu78
- Posts: 1
- Joined: Mon Jun 13, 2022 9:24 am
PN532 NFC/RFID controller breakout board (v1.6) compatible w
Afternoon I'm new to all this do I need to do soldering in order to assemble PN532 NFC/RFID controller breakout board (v1.6) with raspberry pi 2b or is not needed?
- mikeysklar
- Posts: 13936
- Joined: Mon Aug 01, 2016 8:10 pm
Re: PN532 NFC/RFID controller breakout board (v1.6) compatib
Soldering is required for the PN532. The headers included are not soldered on and you will need those headers to jumper connections to your Raspberry Pi 2B.
; PN532 NFC/RFID
https://www.adafruit.com/product/364
; female jumper wires
https://www.adafruit.com/product/266
; PN532 NFC/RFID
https://www.adafruit.com/product/364
; female jumper wires
https://www.adafruit.com/product/266
Forum rules
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/
Talk about Adafruit Raspberry Pi® accessories! Please do not ask for Linux support, this is for Adafruit products only! For Raspberry Pi help please visit: http://www.raspberrypi.org/phpBB3/