Hallowing

Wearable electronics: boards, conductive materials, and projects from Adafruit!

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
Duffy1963
 
Posts: 5
Joined: Fri Dec 17, 2021 9:47 pm

Hallowing

Post by Duffy1963 »

I left my Hallowing m4 turned on and plugged in to my laptop. It was displaying one of the pre-installed eyes and had absolutely nothing plugged into it but the LiPo I purchased with it.

In the morning the screen was blank and the board seemed non-responsive. One time I plugged it into the laptop and got a beep from the computer indicating an acknowledgement that something was plugged in. After that the board seems dead.
Any chance of a ressurection.

Colin Winterburn

User avatar
adafruit_support_carter
 
Posts: 29056
Joined: Tue Nov 29, 2016 2:45 pm

Re: Hallowing

Post by adafruit_support_carter »

Double check the power switch and make sure it's on.

What happens if you double press the reset button? Can you get the BOOT folder to show up?

User avatar
Duffy1963
 
Posts: 5
Joined: Fri Dec 17, 2021 9:47 pm

Re: Hallowing

Post by Duffy1963 »

Spreading the reset button caused no reaction. I even checked in device manager and can't find it. I was wrong about not being detected the PC chimes but that is all.

User avatar
Duffy1963
 
Posts: 5
Joined: Fri Dec 17, 2021 9:47 pm

Re: Hallowing

Post by Duffy1963 »

First word last post, should be "pressing or double pressing"

Locked
Please be positive and constructive with your questions and comments.

Return to “Wearables”