Black Lives Matter - Action and Equality. ... Adafruit is open and shipping.
0

Customizable parts
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Customizable parts

by Aman1 on Sat Mar 28, 2020 1:05 am

Hi, I am using the yellow 5*10cm heated fabric (p1481). I was wondering if adafruit would be able to customize the pad to be slightly smaller and run off of 3.7 volts instead of 5 volts? Or does anyone know of similar products that would work well to heat up if I applied about 3.7 volts to it?

Aman1
 
Posts: 3
Joined: Sat Mar 28, 2020 1:01 am

Re: Customizable parts

by adafruit_support_bill on Sat Mar 28, 2020 7:07 am

We don't manufacture these in-house. They are purely resistive heating elements, so they will work at lower voltages with reduced output. the heat output will be proportional to the voltage applied.

We also have this heating fabric which can be cut to any size. https://www.adafruit.com/product/3670

adafruit_support_bill
 
Posts: 77951
Joined: Sat Feb 07, 2009 10:11 am

Re: Customizable parts

by Aman1 on Sat Mar 28, 2020 2:43 pm

Thank you. I originally had that other one that could be cut to any size, but it didn't work. This is a big ask, but would you be able to put me in touch with your manufacturer so I could potentially talk to him/her about making different dimensions? Thanks again!

Aman1
 
Posts: 3
Joined: Sat Mar 28, 2020 1:01 am

Re: Customizable parts

by adafruit_support_bill on Sat Mar 28, 2020 3:13 pm

We get these through one of our suppliers. But the contact information for the manufacturer is on the data sheet: https://cdn-shop.adafruit.com/datasheet ... Fabric.pdf

adafruit_support_bill
 
Posts: 77951
Joined: Sat Feb 07, 2009 10:11 am

Please be positive and constructive with your questions and comments.