Is it possible to use NeoPixel Ring 24 x 5050 RGB LED with Flora following the Ampli-Tie project?
Thank you.
Flora & NeoPixel Ring for Ampli-tie
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88089
- Joined: Sat Feb 07, 2009 10:11 am
Re: Flora & NeoPixel Ring for Ampli-tie
Yes. Programing for the rings is the same as for any other Neopixels. They just happen to be arranged in a circle.
- RMARS
- Posts: 3
- Joined: Tue Jun 29, 2021 11:13 am
Re: Flora & NeoPixel Ring for Ampli-tie
Thank you for the prompt reply! New to all this!
I don't have any ribbon cable but have 300v 22AWG stranded wire. Will this work alright for all my connections?
I don't have any ribbon cable but have 300v 22AWG stranded wire. Will this work alright for all my connections?
- adafruit_support_bill
- Posts: 88089
- Joined: Sat Feb 07, 2009 10:11 am
Re: Flora & NeoPixel Ring for Ampli-tie
Yes. That should be fine for your connections. Be careful to avoid any stray strands that might cause a short circuit. Solid core is a little easier to work with.
- RMARS
- Posts: 3
- Joined: Tue Jun 29, 2021 11:13 am
Re: Flora & NeoPixel Ring for Ampli-tie
Great! Thanks for that. Tomorrow just got a lot more exciting!
Please be positive and constructive with your questions and comments.