Due to high demand expect some shipping delays at this time, orders may not ship for 1-2 business days.
0

Adafruit_TiCoServo libraries do not work on SAMD21 chips
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Adafruit_TiCoServo libraries do not work on SAMD21 chips

by yihuang on Mon Oct 25, 2021 10:48 pm

I was working on a project to use WS2812 and SG90 Servo on the SAMD21 chip. I found NeoPXL8 and TiCoServo in Adafruit. NeoPXL8 can normally drive my RGB LED, but TiCoServo does not run on SAMD21 chip, so dear developer, do you have any plans to add SAMD21 to the TiCoServo library? Or do you have another solution?

yihuang
 
Posts: 2
Joined: Mon Oct 25, 2021 10:41 pm

Re: Adafruit_TiCoServo libraries do not work on SAMD21 chips

by adafruit_support_bill on Tue Oct 26, 2021 5:40 am

The TiCo Servo library is very hardware specific to 8-bit AVR processor architecture. We have a different library that is designed for the SAMD processor architecture:
https://learn.adafruit.com/dma-driven-n ... s/overview

adafruit_support_bill
 
Posts: 82477
Joined: Sat Feb 07, 2009 10:11 am

Re: Adafruit_TiCoServo libraries do not work on SAMD21 chips

by yihuang on Wed Oct 27, 2021 3:47 am

adafruit_support_bill wrote:The TiCo Servo library is very hardware specific to 8-bit AVR processor architecture. We have a different library that is designed for the SAMD processor architecture:
https://learn.adafruit.com/dma-driven-n ... s/overview

Thanks for your guidance, I will try this method

yihuang
 
Posts: 2
Joined: Mon Oct 25, 2021 10:41 pm

Please be positive and constructive with your questions and comments.