I purchased three Trinkeys. One of them does not go into bootloader mode. When clicking the button, I get four red LEDs.
-Stephen
Neo Trinkey button not activating bootloader
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- stephencross
- Posts: 7
- Joined: Mon Apr 05, 2021 3:29 pm
- mikeysklar
- Posts: 13936
- Joined: Mon Aug 01, 2016 8:10 pm
Re: Neo Trinkey button not activating bootloader
Hi Stephen,
It sounds like one of the Neo Trinkeys did not get a bootloader installed. The easiest option is usually for us to replace, but if you really wanted to you can use another SAMD controller to upload a fresh bootloader.
https://learn.adafruit.com/programming- ... an-arduino
Please send an e-mail to [email protected] requesting a replacement Neo Trinkey if the recovery process stated in the above link is of no interest to you. You will need to provide your order number and a link to this forum thread for replacement.
It sounds like one of the Neo Trinkeys did not get a bootloader installed. The easiest option is usually for us to replace, but if you really wanted to you can use another SAMD controller to upload a fresh bootloader.
https://learn.adafruit.com/programming- ... an-arduino
Please send an e-mail to [email protected] requesting a replacement Neo Trinkey if the recovery process stated in the above link is of no interest to you. You will need to provide your order number and a link to this forum thread for replacement.
Please be positive and constructive with your questions and comments.