5v Trinket Won't Enter Bootloader Mode

Adafruit's tiny microcontroller platform. Please tell us which board you are using.
For CircuitPython issues, ask in the Adafruit CircuitPython forum.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
secnerret
 
Posts: 11
Joined: Thu Jan 28, 2016 12:11 am

5v Trinket Won't Enter Bootloader Mode

Post by secnerret »

I have two new 5v trinkets that have each been driving a single neopixel light and neither will enter bootloader mode. They did get programmed earlier but won't go back into bootloader mode to change the light color setup. Capacitor on 12v line and 480 Ohm resistors on data pins, and they currently operate on either 12v or USB, just no Bootloader mode.

Red light lights briefly on button press or plugin to USP port (Mac OS X 10.15.7), but computer restarts, board powering on/off, button pressing does nothing.

Any ideas or suggestions?

User avatar
secnerret
 
Posts: 11
Joined: Thu Jan 28, 2016 12:11 am

Re: 5v Trinket Won't Enter Bootloader Mode

Post by secnerret »

Disregard--third USB cable I tried worked...

Locked
Please be positive and constructive with your questions and comments.

Return to “Trinket ATTiny, Trinket M0”