Adafruit_TiCoServo libraries do not work on SAMD21 chips
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- yihuang
- Posts: 4
- Joined: Mon Oct 25, 2021 10:41 pm
Adafruit_TiCoServo libraries do not work on SAMD21 chips
I was working on a project to use WS2812 and SG90 Servo on the SAMD21 chip. I found NeoPXL8 and TiCoServo in Adafruit. NeoPXL8 can normally drive my RGB LED, but TiCoServo does not run on SAMD21 chip, so dear developer, do you have any plans to add SAMD21 to the TiCoServo library? Or do you have another solution?
- adafruit_support_bill
- Posts: 88155
- Joined: Sat Feb 07, 2009 10:11 am
Re: Adafruit_TiCoServo libraries do not work on SAMD21 chips
The TiCo Servo library is very hardware specific to 8-bit AVR processor architecture. We have a different library that is designed for the SAMD processor architecture:
https://learn.adafruit.com/dma-driven-n ... s/overview
https://learn.adafruit.com/dma-driven-n ... s/overview
- yihuang
- Posts: 4
- Joined: Mon Oct 25, 2021 10:41 pm
Re: Adafruit_TiCoServo libraries do not work on SAMD21 chips
Thanks for your guidance, I will try this methodadafruit_support_bill wrote:The TiCo Servo library is very hardware specific to 8-bit AVR processor architecture. We have a different library that is designed for the SAMD processor architecture:
https://learn.adafruit.com/dma-driven-n ... s/overview
Please be positive and constructive with your questions and comments.