Hey,
I saw the "Portable Trellis Sound Board" project back in May and planned to build the project, so I order the parts in July. Sadly I didn't have the time to sit down and work on the project before the project page had a update, informing "This tutorial may be outdated. It is no longer recommended for beginners ..." which put me off from trying to build the project.
I just recently got the time and energy to try and fight a loosing battle, in hope that I might be lucky and get it to work. Unlucky for me I didn't manage to.
So I am here to ask if there is any good replacement for the Pro Trinket (since it seems a lot of problems are regarding it) that would allow me to finish this project?
Or do you have a similar guide in the making that could replace it, so it is still possible to make it?
I still want to finish the project if possible, with a different controller.
https://learn.adafruit.com/portable-tre ... d/software
Replacement to the Pro Trinket?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88149
- Joined: Sat Feb 07, 2009 10:11 am
Re: Replacement to the Pro Trinket?
If you do use a Pro Trinket, I would recommend getting an FTDI cable for programming it via the FTDI
https://www.adafruit.com/product/70
https://learn.adafruit.com/introducing- ... using-ftdi
Otherwise, the Feather 32U4 would be a good choice.
https://www.adafruit.com/product/2771
https://www.adafruit.com/product/70
https://learn.adafruit.com/introducing- ... using-ftdi
Otherwise, the Feather 32U4 would be a good choice.
https://www.adafruit.com/product/2771
Please be positive and constructive with your questions and comments.