Replacement to the Pro Trinket?

Adafruit's tiny microcontroller platform. Please tell us which board you are using.
For CircuitPython issues, ask in the Adafruit CircuitPython forum.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
Macch1
 
Posts: 1
Joined: Sun Nov 21, 2021 5:32 pm

Replacement to the Pro Trinket?

Post by Macch1 »

Hey,

I saw the "Portable Trellis Sound Board" project back in May and planned to build the project, so I order the parts in July. Sadly I didn't have the time to sit down and work on the project before the project page had a update, informing "This tutorial may be outdated. It is no longer recommended for beginners ..." which put me off from trying to build the project.

I just recently got the time and energy to try and fight a loosing battle, in hope that I might be lucky and get it to work. Unlucky for me I didn't manage to.
So I am here to ask if there is any good replacement for the Pro Trinket (since it seems a lot of problems are regarding it) that would allow me to finish this project?
Or do you have a similar guide in the making that could replace it, so it is still possible to make it?

I still want to finish the project if possible, with a different controller.

https://learn.adafruit.com/portable-tre ... d/software

User avatar
adafruit_support_bill
 
Posts: 88087
Joined: Sat Feb 07, 2009 10:11 am

Re: Replacement to the Pro Trinket?

Post by adafruit_support_bill »

If you do use a Pro Trinket, I would recommend getting an FTDI cable for programming it via the FTDI
https://www.adafruit.com/product/70
https://learn.adafruit.com/introducing- ... using-ftdi

Otherwise, the Feather 32U4 would be a good choice.
https://www.adafruit.com/product/2771

Locked
Please be positive and constructive with your questions and comments.

Return to “Trinket ATTiny, Trinket M0”