I could use some guidance, please.
I see the Trinket schematics posted in the Adafruit github site
( https://github.com/adafruit/Adafruit-Trinket-PCB ),
but when I click on a brd or sch file, all I see is what looks like an xml file showing layers, wires, holes, etc.
I use Eagle & Altium for PCB design, so how do I get this into either of those programs.....?
--Don
Trinket schematics
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- dastels
- Posts: 15653
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Trinket schematics
Have you tried loading them from within Eagle?
Dave
Dave
- ttu_don
- Posts: 53
- Joined: Mon Mar 17, 2014 12:36 am
Re: Trinket schematics
No. I'm not sure how to do that.....
- dastels
- Posts: 15653
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Trinket schematics
It's been a while but I assume Open in the File menu.
Dave
Dave
- ttu_don
- Posts: 53
- Joined: Mon Mar 17, 2014 12:36 am
Re: Trinket schematics
So I right-click on the link in github, save as.... then open it in Eagle?
- dastels
- Posts: 15653
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Trinket schematics
That seems reasonable.
Dave
Dave
- ttu_don
- Posts: 53
- Joined: Mon Mar 17, 2014 12:36 am
Re: Trinket schematics
Nope. That doesn't work.....
Eagle doesn't recognize .sch or .brd files
Altium will open the .sch file, but all that shows up is a blank schematic...... It does not recognize a .brd file.
Any other suggestions?
Eagle doesn't recognize .sch or .brd files
Altium will open the .sch file, but all that shows up is a blank schematic...... It does not recognize a .brd file.
Any other suggestions?
- dastels
- Posts: 15653
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Trinket schematics
It's for the Trinket so it might be for a very old version of Eagle with a currently unsupported format.
Dave
Dave
Please be positive and constructive with your questions and comments.