0

sending sensor data (temp, press, hum) to BLE connect
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

sending sensor data (temp, press, hum) to BLE connect

by Rcayot on Mon Jan 25, 2021 5:59 pm

I have an itsybitsy nrf52840 that I have been enjoying using. I put together a nice LED strip patern control program using the 'controller' portion of the BLE connect app in IOS. It works flawlessly.

What I would now like to do is sent temperature, pressure, and humidity from my BME280 using the nrf52840 to send it to BLE connect. However, I see only accelerometer and location data are 'in the can' and would like to know how best the get say the data displayed in 'plotter'. I have not found any examples or learning modules that detail how to do this.

If there are any example code, learning modules etc. along these lines please reply with a link or suggestion. I am using CircuitPython.

Thanks,

Roger Ayotte

Rcayot
 
Posts: 148
Joined: Sat Feb 08, 2020 6:48 pm

Please be positive and constructive with your questions and comments.