0

Integrating Adafruit 1733 Anamometer wirelessly into Weather
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Integrating Adafruit 1733 Anamometer wirelessly into Weather

by Ricvice on Mon Feb 08, 2021 4:12 am

Greetings
I am using your #1733 Anamometer with analog output. I currently am attempting to create a wireless weather station. I currently am using a Arduino Mega, Nrf24l01 transceivers and a working sketch using Dht22 temp/humidity sensor for remote readings using a Nano.that part works great. Now I need to find how to get the Anamometer output ( which is just a output voltage) wirelessly into the inside unit. I think it would involve some kind of,( analoge read function ?).
I have seen where a few on the forum has attempted the same. I'm not sure of what and how much needs to be sent so the inside unit can interpret it. I'm hope you or other posters my have some ideas or tips to help me along. I am stumped at this point.

Thank ya
Ricvice

Ricvice
 
Posts: 3
Joined: Sun Feb 07, 2021 11:21 pm

Re: Integrating Adafruit 1733 Anamometer wirelessly into Wea

by mikeysklar on Tue Feb 09, 2021 4:16 pm

@RicVice,

It is pretty straight forward to read our anamometer. Plugin the blue line to a analog pin on your arduino and read the sensor. This is a good guide to get going with it:

https://www.geeky-gadgets.com/arduino-w ... -30032016/

mikeysklar
 
Posts: 5015
Joined: Mon Aug 01, 2016 8:10 pm

Re: Integrating Adafruit 1733 Anamometer wirelessly into Wea

by Ricvice on Tue Feb 09, 2021 6:28 pm

Thank you for your reply
Yes I have that code and it is working well. My issue is how to make it wireless using a Nrf24l01, nano to to the indoor base mega nrf24l01 setup. How much of the code would I need to transmit from the anamometer /nano/ nrf24l01 to obtain required readings. Have looked and searched but have not found any other people who have done this.

Tnx

Ricvice
 
Posts: 3
Joined: Sun Feb 07, 2021 11:21 pm

Re: Integrating Adafruit 1733 Anamometer wirelessly into Wea

by mikeysklar on Wed Feb 10, 2021 1:11 pm

@RicVice,

I don't have any experience with the nRF24l01, but we do have a thread on the connections and example code you might want to check out.

viewtopic.php?f=25&t=55670

mikeysklar
 
Posts: 5015
Joined: Mon Aug 01, 2016 8:10 pm

Please be positive and constructive with your questions and comments.