Hi,
I'm starting an IOT course and the hardware required is "ESP32 V1" which will be uploaded with Arduino IDE. What's the best match to this version on the Adafruit website since I see so many that use Circuitpython? Thanks.
ESP 32 V1 best match?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_mike
- Posts: 67446
- Joined: Thu Feb 11, 2010 2:51 pm
Re: ESP 32 V1 best match?
This is Espressif's own ESP32 development board:
https://www.adafruit.com/product/3269
It's probably closest to a baseline version. You might want to check if either of the WROVER boards with external PSRAM will work:
https://www.adafruit.com/product/4693
https://www.adafruit.com/product/3384
https://www.adafruit.com/product/3269
It's probably closest to a baseline version. You might want to check if either of the WROVER boards with external PSRAM will work:
https://www.adafruit.com/product/4693
https://www.adafruit.com/product/3384
Please be positive and constructive with your questions and comments.