Due to high demand, expect some shipping delays at this time - orders may not ship for up to 2-3 business days.
0

Can't capture packets using Bluefruit LE Sniffer - nRF51822
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Re: Can't capture packets using Bluefruit LE Sniffer - nRF51

by _jeet_rami_ on Thu Dec 23, 2021 3:09 am

adafruit2 wrote:we dont think so - we do know that the channel for BLE can be 1 to 3 and the sniffer only works on one channel at a time - not sure if that is relevant


First of all sorry for late reply. If you don't mind can you explain what you mean by BLE can work work on only one channel at a time. And can you please give some information how I can connect the adafruit Bluefruit sniffer with J-Link Segger. I can't make sense how I can connect so flash the firmware. Any help would be grateful.

_jeet_rami_
 
Posts: 6
Joined: Sun Dec 05, 2021 11:12 am

Re: Can't capture packets using Bluefruit LE Sniffer - nRF51

by adafruit2 on Thu Dec 23, 2021 8:31 pm

the bottom 4 pads are labeled on the sniffer for the 4 JLINK connections. you will need to match the wires up and then use nrfjprog or similar. we don't have the instructions for the firmware you've got but you can look up to see what we used for the current firmware. see https://learn.adafruit.com/introducing- ... aq-2317992 for more

see https://learn.adafruit.com/introducing- ... aq-2317991 for the other question

adafruit2
Site Admin
 
Posts: 20857
Joined: Fri Mar 11, 2005 7:36 pm

Please be positive and constructive with your questions and comments.