I just received my feather fona, and I made a test from testfona library. I changed
#define FONA_RX 9
#define FONA_TX 8
#define FONA_RST 4
#define FONA_RI 7
but the feather after loads the code, did not response, I input the letter but nothing happens.
I setup the serial as 115200baud, and NL & CR
I'm using a Spanish sim but works around the world.
This is the response:
20:30:37.819 -> FONA basic test
20:30:37.819 -> Initializing....(May take 3 seconds)
20:30:37.960 -> Attempting to open comm with ATs
20:30:38.007 -> ---> AT
20:30:38.523 -> <---
20:30:38.570 -> ---> AT
20:30:39.088 -> <---
20:30:39.653 -> ---> AT
20:30:39.981 -> <--- AT
20:30:40.028 -> ---> AT
20:30:40.028 -> <--- AT
20:30:40.075 -> ---> ATE0
20:30:40.123 -> <--- ATE0
20:30:40.262 -> ---> ATE0
20:30:40.309 -> <--- OK
20:30:40.356 -> ---> AT+CVHU=0
20:30:40.403 -> <--- OK
20:30:40.545 -> ---> ATI
20:30:41.155 -> <--- SIM800 R13.08
20:30:41.155 ->
20:30:41.155 -> OK
20:30:41.155 ->
20:30:41.155 -> RDY
20:30:41.155 ->
20:30:41.155 -> +CFUN: 1
20:30:41.155 ->
20:30:41.155 -> ---> AT+GMM
20:30:41.766 -> <--- SIMCOM_SIM800H
20:30:41.766 ->
20:30:41.766 -> OK
20:30:41.766 ->
20:30:41.766 -> +CPIN: READY
20:30:41.766 ->
20:30:41.766 -> ---> AT+CPMS="SM","SM","SM"
20:30:41.860 -> <--- ERROR
20:30:41.860 -> FONA is OK
20:30:41.860 -> Found FONA 800H
20:30:41.908 -> ---> AT+GSN
20:30:42.000 -> <--- 860041044183658
20:30:42.000 -> Module I*******************
20:30:42.000 -> -------------------------------------
20:30:42.000 -> [?] Print this menu
20:30:42.000 -> [a] read the ADC 2.8V max (FONA800 & 808)
20:30:42.000 -> read the Battery V and % charged
20:30:42.000 -> [C] read the SIM CCID
20:30:42.000 -> Unlock SIM with PIN code
20:30:42.000 -> read RSSI
20:30:42.000 -> [n] get Network status
20:30:42.000 -> [v] set audio Volume
20:30:42.000 -> [V] get Volume
20:30:42.000 -> [H] set Headphone audio (FONA800 & 808)
20:30:42.000 -> [e] set External audio (FONA800 & 808)
20:30:42.000 -> [T] play audio Tone
20:30:42.000 -> [P] PWM/Buzzer out (FONA800 & 808)
20:30:42.000 -> [f] tune FM radio (FONA800)
20:30:42.000 -> [F] turn off FM (FONA800)
20:30:42.000 -> [m] set FM volume (FONA800)
20:30:42.000 -> [M] get FM volume (FONA800)
20:30:42.000 -> [q] get FM station signal level (FONA800)
20:30:42.000 -> [c] make phone Call
20:30:42.000 -> [A] get call status
20:30:42.000 -> [h] Hang up phone
20:30:42.000 -> [p] Pick up phone
20:30:42.000 -> [N] Number of SMSs
20:30:42.000 -> [r] Read SMS #
20:30:42.000 -> [R] Read All SMS
20:30:42.000 -> [d] Delete SMS #
20:30:42.000 -> [s] Send SMS
20:30:42.000 -> Send USSD
20:30:42.000 -> [y] Enable network time sync (FONA 800 & 808)
20:30:42.000 -> [Y] Enable NTP time sync (GPRS FONA 800 & 808)
20:30:42.000 -> [t] Get network time
20:30:42.000 -> [G] Enable GPRS
20:30:42.000 -> [g] Disable GPRS
20:30:42.000 -> [l] Query GSMLOC (GPRS)
20:30:42.000 -> [w] Read webpage (GPRS)
20:30:42.000 -> [W] Post to website (GPRS)
20:30:42.000 -> [S] create Serial passthru tunnel
20:30:42.000 -> -------------------------------------
20:30:42.000 ->
20:30:42.000 -> FONA>
20:30:42.326 -> Call Ready
20:30:42.983 ->
20:30:42.983 -> SMS Ready
thanks for your help guys
Eduard