0

IDEAS: DASHBOARD BLOCK SUGGESTIONS
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Re: IDEAS: DASHBOARD BLOCK SUGGESTIONS

by trackseven on Tue Aug 13, 2019 8:40 pm

PaulRowntree wrote:A Gauge that had safe, warning and danger zones. From Google charts
Google gauge.png



Yess please add these for computer monitoring projects

trackseven
 
Posts: 5
Joined: Mon Aug 12, 2019 4:21 pm

Re: IDEAS: DASHBOARD BLOCK SUGGESTIONS

by trackseven on Tue Aug 13, 2019 8:52 pm

How in this tutorial did they get these symbols

https://learn.adafruit.com/adafruit-io- ... ython-code
Attachments
microcontrollers_IO_-_Environmental_Monitor-dash.png
microcontrollers_IO_-_Environmental_Monitor-dash.png (50.88 KiB) Viewed 234 times

trackseven
 
Posts: 5
Joined: Mon Aug 12, 2019 4:21 pm

Re: IDEAS: DASHBOARD BLOCK SUGGESTIONS

by trackseven on Tue Aug 13, 2019 8:55 pm

I got the regular symbols for a project i just finished

https://io.adafruit.com/trackseven/dashboards/bmp388
Attachments
bmp388iodash.jpg
bmp388iodash.jpg (103.62 KiB) Viewed 234 times

trackseven
 
Posts: 5
Joined: Mon Aug 12, 2019 4:21 pm

Re: IDEAS: DASHBOARD BLOCK SUGGESTIONS

by jwcooper on Fri Aug 23, 2019 3:49 pm

trackseven wrote:How in this tutorial did they get these symbols

https://learn.adafruit.com/adafruit-io- ... ython-code


They are the "Icon" block types. You can find them when creating a new block for your dashboard.

jwcooper
 
Posts: 670
Joined: Tue May 01, 2012 9:08 pm

Re: IDEAS: DASHBOARD BLOCK SUGGESTIONS

by wsquared58 on Fri Aug 23, 2019 5:18 pm

This is more of an enhancement to the line chart block,

1) No matter what a point is set to, as far as scale (0psi - 10 psi), the X axis minimum and maximum represent 0% - 100% of the configured scale, so dissimilar points should show up even if they are completely dissimilar such as temperature and pressure. For example, BME280 Temp indicates 70F, I set scale to 40F min & 100F max and Barometric Pressure indicates 29.5"Hg (I've done unit conversions in the python code) and I set 27" Hg Min and 32"Hg Max and I put them on same line chart block they should both be visible. They are both inside of their respective min and max scales.

2) Clicking on the temperature line puts temperature X-axis in focus and presents those units. Clicking on pressure line changes focus and X-axis scale changes to pressure units.
Across the board no matter what the point is, as long as it falls within the bounds of its configured X min and X max, it should be visible, even if every point is a dissimilar sensor or unit of measure.

wsquared58
 
Posts: 124
Joined: Sun Jun 09, 2019 9:13 pm

Re: IDEAS: DASHBOARD BLOCK SUGGESTIONS

by namangarg on Sat Sep 07, 2019 6:35 am

hello guys,


ideas dashboard block suggestions are as follow

rules for better dashboard design. ...
Chose the right representation for the data. ...
Clear and consistent naming convention, Consistent date formatting, Truncate large values. ...
Define the layout. ...
Use building blocks with consistent structure. ...
Double your margins. ...
Don't hide information.

thanks and regards

namangarg
 
Posts: 1
Joined: Sat Sep 07, 2019 6:29 am

Please be positive and constructive with your questions and comments.