0

VCC=0V on DC Stepper Motor FeatherWing.2927
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

VCC=0V on DC Stepper Motor FeatherWing.2927

by ada_cw on Fri Sep 13, 2019 2:04 am

Hi,

I supplied 5V to the DC Stepper Motor FeatherWing 2927 board. However, the VCC output is 0V. The green LED on the board is on.

I looked at the schematics at https://github.com/adafruit/Adafruit-DC ... erWing-PCB. How is the input 5V converted to VCC 3.3V?

Thanks,

ada_cw
 
Posts: 2
Joined: Fri Sep 13, 2019 1:43 am

Re: VCC=0V on DC Stepper Motor FeatherWing.2927

by adafruit_support_bill on Fri Sep 13, 2019 6:00 am

How is the input 5V converted to VCC 3.3V?

It is not. The external power input is for motors only. The 3.3v logic power comes from the Feather 3.3v pin when you stack it on your Feather.

adafruit_support_bill
 
Posts: 74337
Joined: Sat Feb 07, 2009 10:11 am

Re: VCC=0V on DC Stepper Motor FeatherWing.2927

by ada_cw on Fri Sep 13, 2019 3:40 pm

I see. It helps. Thank you.

ada_cw
 
Posts: 2
Joined: Fri Sep 13, 2019 1:43 am

Please be positive and constructive with your questions and comments.