It turns out that the spacing between the mounting holes in line with the ESP32 antenna (opposite the USB connector) is 0.75" instead of 0.7", as defined in the Feather files.
Do I have an earlier version of the Huzzah32?
Thank you for the AWESOME work!
Raio
Feather Huzzah32 dimensions...
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- mikeysklar
- Posts: 14193
- Joined: Mon Aug 01, 2016 8:10 pm
Re: Feather Huzzah32 dimensions...
Hi Raio,
Let's make sure we are talking about the same board and files.
Can you post a photo of the bottom of your Feather Huzzah32.
Our PCB image on the Huzzah32 page agrees with what you have stated with a spacing of the mounting holes being .75" on center (not .7").
https://learn.adafruit.com/adafruit-huz ... /downloads
Let's make sure we are talking about the same board and files.
Can you post a photo of the bottom of your Feather Huzzah32.
Our PCB image on the Huzzah32 page agrees with what you have stated with a spacing of the mounting holes being .75" on center (not .7").
https://learn.adafruit.com/adafruit-huz ... /downloads
Please be positive and constructive with your questions and comments.