0

Feather Huzzah32 dimensions...
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Feather Huzzah32 dimensions...

by raio on Wed May 05, 2021 10:29 am

It turns out that the spacing between the mounting holes in line with the ESP32 antenna (opposite the USB connector) is 0.75" instead of 0.7", as defined in the Feather files.
Do I have an earlier version of the Huzzah32?

Thank you for the AWESOME work!
Raio

raio
 
Posts: 2
Joined: Wed Mar 13, 2019 10:58 am

Re: Feather Huzzah32 dimensions...

by mikeysklar on Thu May 06, 2021 6:33 pm

Hi Raio,

Let's make sure we are talking about the same board and files.

Can you post a photo of the bottom of your Feather Huzzah32.

Our PCB image on the Huzzah32 page agrees with what you have stated with a spacing of the mounting holes being .75" on center (not .7").

7630937F-88B1-4178-A904-0F308D64C83D.png
7630937F-88B1-4178-A904-0F308D64C83D.png (237.45 KiB) Viewed 38 times


https://learn.adafruit.com/adafruit-huz ... /downloads

mikeysklar
 
Posts: 4631
Joined: Mon Aug 01, 2016 8:10 pm

Please be positive and constructive with your questions and comments.