0

Feather nRF32: Failed to initialize calibration helper
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Feather nRF32: Failed to initialize calibration helper

by GioManna on Sun May 29, 2022 5:42 am

Hello everyone,
I recently bought a Feather nRF32 board for my 9DOF sensor NXP Precision 9DoF. I am new to this world (I come from software development), so I started exploring the many examples in the Blog. I was trying to achieve something similar to this guide:
https://learn.adafruit.com/how-to-fuse-motion-sensor-data-into-ahrs-orientation-euler-quaternions
However, when I load the sensor_calibration_read example, I get the "Failed to initialize calibration helper" error. My board should have 512KB of flash memory, according to the specs, so this shouldn't happen.

What could be the problem? What can I do?

GioManna
 
Posts: 2
Joined: Sun May 29, 2022 5:36 am

Re: Feather nRF32: Failed to initialize calibration helper

by GioManna on Sun May 29, 2022 9:13 am

Edit: the board is nRF52832

GioManna
 
Posts: 2
Joined: Sun May 29, 2022 5:36 am

Please be positive and constructive with your questions and comments.