0

huzzah esp32 stuck in resetting
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

huzzah esp32 stuck in resetting

by klankschap on Sat Mar 31, 2018 12:32 pm

the huzzah esp32 does not respond to the esptool anymore.
when checking the usb output it keeps spitting pout the same reset error messages.
how to proceed?



Rebooting...
ets Jun 8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:956
load:0x40078000,len:0
load:0x40078000,len:13076
entry 0x40078a58
Guru Meditation Error: Core 1 panic'ed (LoadProhibited)
. Exception was unhandled.
Register dump:
PC : 0x40081201 PS : 0x00060030 A0 : 0x800d0cd8 A1 : 0x3ffca500
A2 : 0x00000009 A3 : 0x00000002 A4 : 0x00000020 A5 : 0x80000020
A6 : 0x00060021 A7 : 0x00000000 A8 : 0x3f40136c A9 : 0xffffffff
A10 : 0xffffffff A11 : 0x00000054 A12 : 0x08000000 A13 : 0x3ffc4ed0
A14 : 0xffffffff A15 : 0x00060023 SAR : 0x0000001a EXCCAUSE: 0x0000001c
EXCVADDR: 0xffffffff LBEG : 0x00000000 LEND : 0x00000000 LCOUNT : 0x00000000

Backtrace: 0x40081201:0x3ffca500 0x400d0cd5:0x3ffca520 0x400e3f57:0x3ffca540

Rebooting...
ets Jun 8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:956
load:0x40078000,len:0
load:0x40078000,len:13076
entry 0x40078a58
GuGuru Meditation Error: Core 0 panic'ed (IllegalInstruction)
. Exception was unhandled.
Register dump:
PC : 0x400d43a1 PS : 0x00060b33 A0 : 0x800d476e A1 : 0x3ffc6ce0
A2 : 0xeeeeeeee A3 : 0x3ffc6d0f A4 : 0x00015ce8 A5 : 0x3ffc2c90
A6 : 0x00000428 A7 : 0x00000000 A8 : 0x80085481 A9 : 0x3ffc6cd0
A10 : 0x3ffc6e04 A11 : 0x00060b23 A12 : 0x00060b23 A13 : 0x00000001
A14 : 0x00060b20 A15 : 0x3ffc67e0 SAR : 0x00000000 EXCCAUSE: 0x00000000
EXCVADDR: 0x00000000 LBEG : 0x00000000 LEND : 0x00000000 LCOUNT : 0x00000000

Backtrace: 0x400d43a1:0x3ffc6ce0 0x400d476b:0x3ffc6d00 0x400d479b:0x3ffc6d30 0x400d394d:0x3ffc6d50 0x40085af6:0x3ffc6d70

klankschap
 
Posts: 21
Joined: Sun Sep 09, 2012 6:50 am

Re: huzzah esp32 stuck in resetting

by KTibow on Wed Feb 13, 2019 11:37 am

Can you post your code? If you need to upload a sketch to it, try holding down its reset button until Arduino finishes compiling.

KTibow
 
Posts: 1
Joined: Sat Nov 03, 2018 9:45 pm

Please be positive and constructive with your questions and comments.