Neotrellis 4x4 board issues

Please tell us which board you are using.
For CircuitPython issues, ask in the Adafruit CircuitPython forum.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
luisg
 
Posts: 2
Joined: Thu Sep 06, 2012 10:27 am

Neotrellis 4x4 board issues

Post by luisg »

Opening a new separate post as requested for the issue described in viewtopic.php?f=57&t=184041#p893878

In summary, just received the Feather 8x8 kit, 1 out of the 4 boards is not detected by i2c.scan(). I assembled all 4 boards and 3 were recognized without issues. I desoldered the board that was not detected and connected it directly to the feather, but it is still not detected. Package material received for all 4 boards found attached. Let me know if I can test the board or need a picture of it as well!
Attachments
Capture2.PNG
Capture2.PNG (689.85 KiB) Viewed 83 times

User avatar
dastels
 
Posts: 15656
Joined: Tue Oct 20, 2015 3:22 pm

Re: Neotrellis 4x4 board issues

Post by dastels »

Please email [email protected] with a link to this thread, your order number, and request the replacement of one Adafruit NeoTrellis RGB Driver PCB for 4x4 Keypad.

Dave

Locked
Please be positive and constructive with your questions and comments.

Return to “Feather - Adafruit's lightweight platform”