Hello,
I've been working with the feather M4 express for the last several months. One of my units will run its latest circuit python code, but when plugged into my Mac(OS 11.4) I can't see a serial port or the unit's drive. Other units work as expected, showing serial port and drive.
When I double-reset on the unit, the RGB led goes solid red and the pin #13 LED fades on/off quickly.
Are there any recovery methods that don't involved external hardware? (I don't have a JTAg programmer)
Feather M4 Express- no serial port/drive
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- kamonmark
- Posts: 2
- Joined: Sun Oct 17, 2021 3:37 am
Re: Feather M4 Express- no serial port/drive
Aaaaand I figured it out. The handy diagram here that I just came across told me the lights were from no USB.
https://learn.adafruit.com/adafruit-fea ... er-details
In some freak accident I have a solder splatter between a data and power pin on the USB connector make a bridge. Removed that and everything's back to normal. Thanks!
https://learn.adafruit.com/adafruit-fea ... er-details
In some freak accident I have a solder splatter between a data and power pin on the USB connector make a bridge. Removed that and everything's back to normal. Thanks!
Please be positive and constructive with your questions and comments.