feature request - nRF52840 with 1.8V I/O

Please tell us which board you are using.
For CircuitPython issues, ask in the Adafruit CircuitPython forum.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
khp
 
Posts: 1
Joined: Thu Oct 21, 2021 12:09 am

feature request - nRF52840 with 1.8V I/O

Post by khp »

I really like the nRF52480 feather! For an upcoming project I need 1.8V I/O and I was hoping to use the nRF52840 feather, thinking that VDD could be disconnected from 3.3V somewhere on the board to enable high voltage mode/internal regulation. No dice. I haven't worked through all of the details but it appears that adding a single jumper or removable zero-ohm resistor would make this possible. Board space is super tight, I realize, but please consider this for a future revision of the board .

Thanks,
Kevin
Top
Locked
Please be positive and constructive with your questions and comments.

Return to “Feather - Adafruit's lightweight platform”