Feather does not appear as a USB device after uploading a sk
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- fcohen
- Posts: 53
- Joined: Mon Jan 06, 2014 5:14 am
Feather does not appear as a USB device after uploading a sk
I uploaded a sketch and now the board does not register as a USB device on my MacBook Pro. Pressing the Boot and Reset buttons on the board have no change. The Neopixel LED turns-on (that's not my sketch doing that) on boot. I may have encountered this issues https://github.com/espressif/esp-idf/issues/8530
- fcohen
- Posts: 53
- Joined: Mon Jan 06, 2014 5:14 am
Re: Feather does not appear as a USB device after uploading
The board is a Feather ESP32-S3
- fcohen
- Posts: 53
- Joined: Mon Jan 06, 2014 5:14 am
Re: Feather does not appear as a USB device after uploading
Solved this by powering the board (connecting the USB C port to my laptop) and pressing both Boot and Reset simultaneously. Now the board registers as a USB device on my laptop and in Arduino IDE.
Please be positive and constructive with your questions and comments.