I bought an ESP32-S2 last week in order to deploy the ESPHole Ad Blocker on my network, but double-clicking the reset button on the board isn't launching the bootloader or showing the FTHRS2BOOT device as a drive.
Any ideas? Not really sure how to recover from this.
Double-clicking ESP32-S2 RST button does not bring up bootlo
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Funkagenda
- Posts: 11
- Joined: Fri May 20, 2022 4:36 pm
- dastels
- Posts: 15667
- Joined: Tue Oct 20, 2015 3:22 pm
- jwiede
- Posts: 14
- Joined: Thu Sep 27, 2012 9:15 pm
Re: Double-clicking ESP32-S2 RST button does not bring up bo
Depending on precisely which ESP32S2 Feather you have, you might need to press the "BOOT" button when the neostar shows purple, not the "RST" button. Give that a try?
- TI545
- Posts: 98
- Joined: Tue Feb 27, 2018 5:25 pm
Re: Double-clicking ESP32-S2 RST button does not bring up bo
Jwiede. You joined ada forums 10 years ago and this is your second post? Welcome back!
On topic, it does take some practice with the double-tap. Timing. Once I got it, it got easier.
On topic, it does take some practice with the double-tap. Timing. Once I got it, it got easier.
- Funkagenda
- Posts: 11
- Joined: Fri May 20, 2022 4:36 pm
Re: Double-clicking ESP32-S2 RST button does not bring up bo
I guess the thing I missed was the "wait for purple LED" bit, because when I double-tapped and waited for the purple LED on the second tap, it worked. So thanks!
- dastels
- Posts: 15667
- Joined: Tue Oct 20, 2015 3:22 pm
Re: Double-clicking ESP32-S2 RST button does not bring up bo
Excellent!
Dave
Dave
- jwiede
- Posts: 14
- Joined: Thu Sep 27, 2012 9:15 pm
Re: Double-clicking ESP32-S2 RST button does not bring up bo
Glad you got it working!
@TI545, just haven't really had anything I needed to discuss before. ;D
@TI545, just haven't really had anything I needed to discuss before. ;D
Please be positive and constructive with your questions and comments.