Feather nRF32: Failed to initialize calibration helper

Please tell us which board you are using.
For CircuitPython issues, ask in the Adafruit CircuitPython forum.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
GioManna
 
Posts: 2
Joined: Sun May 29, 2022 5:36 am

Feather nRF32: Failed to initialize calibration helper

Post by GioManna »

Hello everyone,
I recently bought a Feather nRF32 board for my 9DOF sensor NXP Precision 9DoF. I am new to this world (I come from software development), so I started exploring the many examples in the Blog. I was trying to achieve something similar to this guide:
https://learn.adafruit.com/how-to-fuse- ... uaternions
However, when I load the sensor_calibration_read example, I get the "Failed to initialize calibration helper" error. My board should have 512KB of flash memory, according to the specs, so this shouldn't happen.

What could be the problem? What can I do?

User avatar
GioManna
 
Posts: 2
Joined: Sun May 29, 2022 5:36 am

Re: Feather nRF32: Failed to initialize calibration helper

Post by GioManna »

Edit: the board is nRF52832

Locked
Please be positive and constructive with your questions and comments.

Return to “Feather - Adafruit's lightweight platform”