AD8495 Moderators: adafruit_support_bill, adafruit

[alainsam]

Can I use several AD8495 boards to monitor several TC using A0->A7? AD WHERE DO i PLUG THE OUT GROUND?

[adafruit_support_carter]

Yes. You can share V+ and GND pins for powering the breakouts. Each breakout's OUT would go to a separate analog channel, like A0, etc.
https://learn.adafruit.com/ad8495-therm ... er/pinouts

[alainsam]

Thanks!
Do I understand that the Ground Out is not connected?

[adafruit_support_carter]

Not sure what you mean by Ground Out. There are two GND pins. They are the same thing. You can use either one you want, or both. There is a separate pin labeled OUT, which is the sensor output.

There are example wiring diagrams in the guide:
https://learn.adafruit.com/ad8495-therm ... -amplifier