0

Hallowing, mu and Python... nothing will run
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Hallowing, mu and Python... nothing will run

by ccook1212 on Mon Oct 08, 2018 3:10 pm

Hi,
Using mu put in the example code. The hallowing blinks once and then goes back to slow flashing green, which I see means this: pulsing GREEN: code.py (etc.) has finished or does not exist
Tried the super simple below, same result. Nothing shows in the serial window.
Attachments
Screen Shot 2018-10-08 at 3.03.07 PM.png
Screen Shot 2018-10-08 at 3.03.07 PM.png (24.85 KiB) Viewed 120 times

ccook1212
 
Posts: 27
Joined: Thu Oct 27, 2016 12:32 pm

Re: Hallowing, mu and Python... nothing will run

by johnpark on Tue Oct 09, 2018 7:18 pm

HalloWing won't show up in the serial/REPL window of Mu, so you'll want to use Screen on a mac or PuTTY on Windows as described here: https://learn.adafruit.com/adafruit-hallowing/kattni-connecting-to-the-serial-console#using-something-else-7-8

johnpark
 
Posts: 367
Joined: Wed Mar 25, 2009 2:15 pm

Please be positive and constructive with your questions and comments.