Adabox 019

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
Nerdfactorynorth
 
Posts: 2
Joined: Mon Aug 02, 2021 7:54 pm

Adabox 019

Post by Nerdfactorynorth »

Cant seem to get any code to run. I loaded the firmware adafruit-circuitpython-adafruit_macropad_rp2040-en_US-7.0.0-alpha.5.uf2 and then tried to run code but nothing is running

User avatar
Nerdfactorynorth
 
Posts: 2
Joined: Mon Aug 02, 2021 7:54 pm

Re: Adabox 019

Post by Nerdfactorynorth »

Whats the best way to restore it to back "out of box"

User avatar
johnpark
 
Posts: 985
Joined: Wed Mar 25, 2009 2:15 pm

Re: Adabox 019

Post by johnpark »

Did you hold the Boot button (encoder switch), then press-release Reset, then release Boot? https://learn.adafruit.com/adafruit-mac ... cuitpython

The drive with switch from CIRCUITPY to RPI-RP2. You can then drag the uf2 file to it. If you want default shipping firmware, you can use this https://learn.adafruit.com/adabox019/original-firmware

Locked
Please be positive and constructive with your questions and comments.

Return to “AdaBox! Show us what you made!”