0

Error in description (PWM on all pins)
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

Error in description (PWM on all pins)

by ursm on Wed May 16, 2018 4:00 am

On the shop page for Feather Express M0 Circuit Python and also on the "learn" handy specs is written: PWM outputs on all pins
Further down on the specific pin description you wrote: Nearly all pins can do PWM output

On the board there are only marked 5, 9, 10, 11 as ~

What's correct now?
Thanks

ursm
 
Posts: 2
Joined: Fri Dec 18, 2015 12:05 pm

Re: Error in description (PWM on all pins)

by tannewt2 on Wed May 16, 2018 11:16 am

Here is a handy CircuitPython script to detect which pins are support for PWM output on CircuitPython: https://learn.adafruit.com/circuitpytho ... res-my-pwm

Note that some pins may not be usable in CircuitPython but are in Arduino due to our current implementation.

~Scott

tannewt2
 
Posts: 815
Joined: Thu Oct 06, 2016 8:48 pm

Re: Error in description (PWM on all pins)

by ursm on Thu May 17, 2018 9:39 am

thanks Scott for that link. I'll try it soon.
But still, the shop page and the learn description is faulty.

ursm
 
Posts: 2
Joined: Fri Dec 18, 2015 12:05 pm

Please be positive and constructive with your questions and comments.