0

circuitpython DIY air quality monitor problem
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

circuitpython DIY air quality monitor problem

by RoyBob on Mon Sep 27, 2021 8:57 am

I am building your diy-air-quality-monitor project and am in the section called "connect to wifi". I am using cryptopython 7.0.0 and the examples set 7.x (This zip was downloaded from https://learn.adafruit.com/adafruit-air ... et-connect on September 21, 2021). When trying to run the code, I get the following error:

code.py output:
ESP32 SPI webclient test
Traceback (most recent call last):
File "code.py", line 50, in <module>
File "adafruit_esp32spi/adafruit_esp32spi.py", line 335, in status
File "adafruit_esp32spi/adafruit_esp32spi.py", line 324, in _send_command_get_response
File "adafruit_esp32spi/adafruit_esp32spi.py", line 238, in _send_command
RuntimeError: ESP32 timed out on SPI select
I can't seem to get past this point. Could you please help me with this

RoyBob
 
Posts: 4
Joined: Sat Jan 06, 2018 1:10 pm

Re: circuitpython DIY air quality monitor problem

by adafruit_support_carter on Tue Sep 28, 2021 1:11 pm

Did you download the zip using the Download Project Bundle button?

bundle.jpg
bundle.jpg (34.03 KiB) Viewed 64 times

adafruit_support_carter
 
Posts: 21400
Joined: Tue Nov 29, 2016 2:45 pm

Re: circuitpython DIY air quality monitor problem

by RoyBob on Wed Sep 29, 2021 8:55 am

Yes I did download the bundle and moved the files to the circuitpy folder. I have just repeated the procedure, and received the same error message.

RoyBob
 
Posts: 4
Joined: Sat Jan 06, 2018 1:10 pm

Re: circuitpython DIY air quality monitor problem

by adafruit_support_carter on Wed Sep 29, 2021 12:23 pm

Is your hardware setup the same as the air quality guide? Feather M4 Express + AirLift FeatherWing? (or, if not, what?) We'll try and duplicate the error here, matching your setup.

adafruit_support_carter
 
Posts: 21400
Joined: Tue Nov 29, 2016 2:45 pm

Re: circuitpython DIY air quality monitor problem

by RoyBob on Thu Sep 30, 2021 8:45 am

Yes, my hardware setup is the same as the air quality guide with the exception of the "FeatherWing Doubler board" which was unavailable at the time. I used 2 "FeatherWing Proto boards" with the 3v and ground connected, and checked with a voltmeter.

RoyBob
 
Posts: 4
Joined: Sat Jan 06, 2018 1:10 pm

Re: circuitpython DIY air quality monitor problem

by RoyBob on Sat Oct 16, 2021 1:02 pm

I have managed to purchase a "FeatherWing Doubler board" , and I no longer receive he error when running the code. Thanks for the help.

RoyBob
 
Posts: 4
Joined: Sat Jan 06, 2018 1:10 pm

Re: circuitpython DIY air quality monitor problem

by adafruit_support_carter on Mon Oct 18, 2021 1:00 pm

Sorry for not responding on your other post. It was probably something with your use of the proto boards on the other setup. But glad it's working now with the doubler.

adafruit_support_carter
 
Posts: 21400
Joined: Tue Nov 29, 2016 2:45 pm

Please be positive and constructive with your questions and comments.