0

circuitpython DIY air quality monitor problem
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

circuitpython DIY air quality monitor problem

by RoyBob on Mon Sep 27, 2021 8:57 am

I am building your diy-air-quality-monitor project and am in the section called "connect to wifi". I am using cryptopython 7.0.0 and the examples set 7.x (This zip was downloaded from https://learn.adafruit.com/adafruit-air ... et-connect on September 21, 2021). When trying to run the code, I get the following error:

code.py output:
ESP32 SPI webclient test
Traceback (most recent call last):
File "code.py", line 50, in <module>
File "adafruit_esp32spi/adafruit_esp32spi.py", line 335, in status
File "adafruit_esp32spi/adafruit_esp32spi.py", line 324, in _send_command_get_response
File "adafruit_esp32spi/adafruit_esp32spi.py", line 238, in _send_command
RuntimeError: ESP32 timed out on SPI select
I can't seem to get past this point. Could you please help me with this

RoyBob
 
Posts: 4
Joined: Sat Jan 06, 2018 1:10 pm

Re: circuitpython DIY air quality monitor problem

by adafruit_support_carter on Tue Sep 28, 2021 1:11 pm

Did you download the zip using the Download Project Bundle button?

bundle.jpg
bundle.jpg (34.03 KiB) Viewed 46 times

adafruit_support_carter
 
Posts: 21359
Joined: Tue Nov 29, 2016 2:45 pm

Re: circuitpython DIY air quality monitor problem

by RoyBob on Wed Sep 29, 2021 8:55 am

Yes I did download the bundle and moved the files to the circuitpy folder. I have just repeated the procedure, and received the same error message.

RoyBob
 
Posts: 4
Joined: Sat Jan 06, 2018 1:10 pm

Re: circuitpython DIY air quality monitor problem

by adafruit_support_carter on Wed Sep 29, 2021 12:23 pm

Is your hardware setup the same as the air quality guide? Feather M4 Express + AirLift FeatherWing? (or, if not, what?) We'll try and duplicate the error here, matching your setup.

adafruit_support_carter
 
Posts: 21359
Joined: Tue Nov 29, 2016 2:45 pm

Re: circuitpython DIY air quality monitor problem

by RoyBob on Thu Sep 30, 2021 8:45 am

Yes, my hardware setup is the same as the air quality guide with the exception of the "FeatherWing Doubler board" which was unavailable at the time. I used 2 "FeatherWing Proto boards" with the 3v and ground connected, and checked with a voltmeter.

RoyBob
 
Posts: 4
Joined: Sat Jan 06, 2018 1:10 pm

Re: circuitpython DIY air quality monitor problem

by RoyBob on Sat Oct 16, 2021 1:02 pm

I have managed to purchase a "FeatherWing Doubler board" , and I no longer receive he error when running the code. Thanks for the help.

RoyBob
 
Posts: 4
Joined: Sat Jan 06, 2018 1:10 pm

Please be positive and constructive with your questions and comments.