Black Lives Matter - Action and Equality. ... Adafruit joins the Stop Hate for Profit campaign.
0

LoraWAN RFM95X Bonnet - Screen Issue in periodic mode
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

LoraWAN RFM95X Bonnet - Screen Issue in periodic mode

by phillip_kujawa on Tue Apr 28, 2020 10:58 am

Hi Guys,

I have an unusual issue. I've been playing around with the sample code for the Raspberry Pi RFM95X Bonnet and noticed a screen issue when sending LoraWAN packets in periodic mode.

The code sample I used is found here: https://learn.adafruit.com/lora-and-lor ... y-pi/usage

After I activate periodic mode the screen starts to glitch after 10 seconds or so. Here is a picture of the screen when its normal and then when it glitches/freezes:

normal.jpg
normal.jpg (530.81 KiB) Viewed 17 times

glitch.jpg
glitch.jpg (544.55 KiB) Viewed 17 times


Note: please ignore the quality of the case, I 3D printed it and it didn't turn out well but its functional.

Is there something wrong with the sample code? I literally just copied and pasted it for testing purposes. Other Lora related sample code works perfectly (point to point periodic code).

phillip_kujawa
 
Posts: 22
Joined: Mon Oct 09, 2017 10:47 pm

Re: LoraWAN RFM95X Bonnet - Screen Issue in periodic mode

by phillip_kujawa on Thu Apr 30, 2020 10:46 am

Anyone? Still having this issue.

Thanks,
PK

phillip_kujawa
 
Posts: 22
Joined: Mon Oct 09, 2017 10:47 pm

Please be positive and constructive with your questions and comments.