Adafruit is open and shipping! Let's build back better, together!
0

stm32f746 not working
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

stm32f746 not working

by walterHynson on Sun Jul 05, 2020 9:35 pm

I have tried multiple times to flash the .bin file onto the STM32F746 Discovery using the ST link Utility and it does not work.

walterHynson
 
Posts: 6
Joined: Wed Dec 23, 2015 7:41 pm

Re: stm32f746 not working

by tannewt on Mon Jul 06, 2020 1:16 am

What .bin were you using? aka, what version?

tannewt
 
Posts: 2010
Joined: Thu Oct 06, 2016 8:48 pm

Re: stm32f746 not working

by klajkor on Sat Jan 09, 2021 3:51 pm

Hi There,
I have the same issue, I flashed the latest 6.0.1 and also the 6.0.0 firmware, but unfortunatelly neither of them worked.
First I erased then the flash memory, then wrote these files with STM32 CubeProgrammer, the flash process was successful.
- adafruit-circuitpython-stm32f746g_discovery-en_US-6.0.0.bin
- adafruit-circuitpython-stm32f746g_discovery-en_US-6.0.1.bin

Note: previously I had MicroPython on this board, which worked.
When I plug in the board to a Windows PC I still see that drive name, what was set suring the MicroPython firmware upgrade process (DIS_746NG)

Do you Guys have any suggestion what can I do to make it work?
Thank you,
Robert

klajkor
 
Posts: 2
Joined: Sat Jan 09, 2021 3:44 pm

Re: stm32f746 not working

by tannewt on Mon Jan 11, 2021 6:48 pm

You could try the latest pre-release as well but it is unlikely to work. STM32F7 support isn't actively being maintained by Adafruit funded folks at the moment because Adafruit doesn't sell any boards with that chip family. I know of no others who are working on it.

tannewt
 
Posts: 2010
Joined: Thu Oct 06, 2016 8:48 pm

Re: stm32f746 not working

by klajkor on Tue Jan 12, 2021 4:29 am

tannewt wrote:You could try the latest pre-release as well but it is unlikely to work. STM32F7 support isn't actively being maintained by Adafruit funded folks at the moment because Adafruit doesn't sell any boards with that chip family. I know of no others who are working on it.


Ok, I see, and I didn't know that.
Thanks anyways, I will try to install the latest pre-release.
I appreciate your help!

klajkor
 
Posts: 2
Joined: Sat Jan 09, 2021 3:44 pm

Please be positive and constructive with your questions and comments.